 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Fiber Optics Heatsink for PAROLI(R) Backplane Module V23814-Z6-Z1 1 General Scope This data sheet describes the detachable heatsink for PAROLI(R) Backplane module V23814-x1306-M1331) (transmitter) resp. V23815-x1306-M1331) (receiver). 2 Technical Data See Figure 1. Dimensions Material Coefficient of thermal conduction No. of fins 45 x 24 x 8.750.2 mm (L x W x H) Al Mg 4.5 Mn, black anodized 110...140 W m-1 K-1 14 (1.4 mm width) 3 Application and Assembly Application is the use of the heatsink to attach onto the module baseplate. For optimized heat transfer between module and heatsink Infineon recommends to use a heat dissipation foil between both parts (e.g. Panasonic PGS 0.1 mm thickness). Dimensions see Figure 2. The fixing is done by two screws. Recommendation for screw dimensions: ISO 7045 - M1.6 x 6 - A2 50 - H. The screws have to be fixed with 10 Ncm. 1) x = K for 1.25 Gbit/s x = U for 1.6 Gbit/s x = Q for 2.7 Gbit/s PAROLI(R) is a registered trademark of Infineon Technologies Data Sheet 1 2003-07-25 V23814-Z6-Z1 Package Outlines 4 Package Outlines Dimensions in mm File: 3204 Figure 1 Heatsink PAROLI Backplane Module Material: Thermal Graphit Foil 0.1 mm thick Dimensions in mm File: 3205 Figure 2 Heat Dissipation Foil Data Sheet 2 2003-07-25 V23814-Z6-Z1 Revision History: Previous Version: Page Subjects (major changes since last revision) 2003-07-25 DS0 For questions on technology, delivery and prices please contact the Infineon Technologies Offices in Germany or the Infineon Technologies Companies and Representatives worldwide: see our webpage at http://www.infineon.com. Edition 2003-07-25 Published by Infineon Technologies AG, St.-Martin-Strasse 53, D-81541 Munchen, Germany (c) Infineon Technologies AG 2003. All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide. Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life-support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. |
Price & Availability of V23814-Z6-Z1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |